APx52xB 系列音频分析仪下载

测量软件

  • APx API MATLAB示例(647 KB)

    APx LabVIEW驱动程序是虚拟仪器(VI)的集合,可为LabVIEW用户提供使用高级LabVIEW典型子VI的APx500应用程序编程接口(API)中的大部分功能。使用驱动程序,您可以使用干净,简洁的LabVIEW代码快速有效地开发APx应用程序。请注意,LabVIEW驱动程序适用于每个版本的APx500。需要LabVIEW 2012或更高版本。

  • APx500_4.4.2 Software(130MB)

  • APx500_4.4.2_w_dot_Net Software(195MB)

  • APx500 Measurement Software (with .NET) (288MB)

    APx500 Measurement Software for all APx Series instruments. Important: APx500 v4.5 requires a Windows 64-bit operating system. This download includes the Microsoft .NET Framework version 4.5, and is suitable for installation on PCs that are not connected to the Internet and do not already have version 4.5 installed. NOTE: .NET 4.5 does not support Microsoft Windows XP.

  • APx500 Measurement Software (224M)

    APx500 measurement software for all APx Series instruments. Important: APx500 v4.5 requires a Windows 64-bit operating system. This download is suitable for most users. If Microsoft .NET version 4.5 is not already on your PC, it will be downloaded during the installation. For PCs that do not have .NET version 4.5 installed, and are not connected to the Internet, download the full installer instead (APx500 Measurement Software (with .NET)) NOTE: .NET 4.5 does not support Microsoft Windows XP.

  • APx500 Series Self-Test(4.4MB)

  • 2700 Series / System Two Performance Check(260k)

  • ATS-2 Performance Check(3MB)

  • APx Hearing Instrument Analyzer Software (5MB)

    Automated test software for the APx511 Hearing Instrument Audio Analyzer. The APx500 Measurement Software of the same version must already be installed before installing this software.

  • APx555 Firmware Update for use of APx500 Software V4.2 and Earlier (220KB)

    FirmwareUpdateB4AIv2.0 is a firmware patch. If you have purchased a new APx555 analyzer on or after June 22, 2016, with serial number 11255 or greater, and you wish to operate this analyzer with older versions of APx500 (specifically v4.0, v4.1 or v 4.2.1), you must download and install this patch. Note that versions previous to v4.0 do not support APx555 hardware under any circumstances.

  • APx500 Measurement Software(220MB)

    For PCs that do not have .NET version 4.5 installed, and are not connected to the Internet, download the full installer instead (APx500 Measurement Software (with .NET)) NOTE: .NET 4.5 does not support Microsoft Windows XP.

  • APx500 Measurement Software (with .NET)(288MB)

    APx500 Measurement Software for all APx Series instruments. Important: APx500 v4.5  (or newer) requires a Windows 64-bit operating system. This download includes the Microsoft .NET Framework version 4.5, and is suitable for installation on PCs that are not connected to the Internet and do not already have version 4.5 installed. NOTE: .NET 4.5 does not support Microsoft Windows XP.

  • APx500 Measurement Software (220MB)

    APx500 measurement software for all APx Series instruments. Important: APx500 v4.5 (or newer) requires a Windows 64-bit operating system.

  • APx500 Measurement Software (with .NET)(288MB)

    APx500 Measurement Software for all APx Series instruments. Important: APx500 v4.5 (or newer) requires a Windows 64-bit operating system.

  • APx500 Measurement Software()

    APx500 measurement software for all APx Series instruments. IMPORTANT: Release version 4.6 requires an APx KeyBox be installed on your APx Series audio analyzer. APx v4.6 will not operate (except in demo mode) without a KeyBox installed.

  • APx500 Measurement Software (with .NET)()

    APx500 measurement software for all APx Series instruments. IMPORTANT: Release version 4.6 requires an APx KeyBox be installed on your APx Series audio analyzer.

  • APx500 Measurement Software(400MB)

    IMPORTANT: Beginning with release 5.0, a paid license is required to run APx500 audio measurement software. See below for details: Version 5.0 is the current release of APx500 audio measurement software, and is shipping with all new APx audio analyzers

  • APx500 Measurement Software (with .NET)(400MB)

    IMPORTANT: Beginning with release 5.0, a paid license is required to run APx500 audio measurement software. See below for details: Version 5.0 is the current release of APx500 audio measurement software, and is shipping with all new APx audio analyzers

  • APx500 新增功能(800KB)

    介绍 APx500 测量软件最新版本 v5.0 中的新功能。其他信息可在最新的自读本中找到,该信息包含在软件下载中。

  • APx500_2.9_SP1_w_dot_Net(388)

  • APx500 Measurement Software(300M)

    APx500 Measurement Software

  • APx500 Measurement Software (with .NET)(400M)

  • APx LabVIEW Driver V4-3(30MB)

  • apx_labview_daq_driver_1-0-0(30MB)

  • APx500 V6.0 upgrade file(360MB)

    APx500 V6.0 upgrade file

  • APx500 V6.0 upgrade file with do Net(428MB)

    APx500 V6.0 upgrade file with do Net

  • APx500 Measurement Software(1KB)

    Version 7.0 is the current release of APx500 audio measurement software, and is shipping with all new B Series APx audio analyzers.

  • APx500 Measurement Software (with .NET)(1KB)

    Version 7.0 is the current release of APx500 audio measurement software, and is shipping with all new B Series APx audio analyzers.

API开发文件

  • APx LabVIEW .NET Driver(36MB)

    The APx LabVIEW Driver is a collection of Virtual Instruments (VIs) that provide LabVIEW users with most of the functionality available in the APx500 Application Programming Interface (API) using high level, LabVIEW-typical subVIs. With the driver, you can quickly

  • APx API Developer Tools(35MB)

    Resources for API developers. Includes VB.NET and C# templates and example code, C++ examples, LabVIEW examples, and the APx Wavereader dll. Documentation includes Intro to Programming the APx500 API and the APx API Browser.

配置文件

  • APx HDMI EDID 配置文件(32kb)

    带 HDMI 的 APx 支持多种 EDID 配置。这些 .edid 文件是为各种音频格式(包括编码音频(如 DTS)预配置的。需要带 HDMI 硬件的 APx585。有关详细信息,请参阅 APx500 用户手册。

  • APx 数字串行 I/O (DSIO) 配置文件(100KB)

    APx 数字串行 I/O 配置文件,适用于 A/D、D/A 和采样率转换器。简化分析器的配置。需要:1) APx500 测量软件和 2) 安装 DSIO 选件的 APx 仪器。

测试信号波形

  • 传输函数 MLS 预置 .wav 文件(32KB)

    此下载(zip 文件)包含下表中列出的 .wav 文件。每个文件包含一个最大长度序列 (MLS) 的短突发。 对于每个采样率,选择 MLS 的顺序,以便信号

  • APx 波形生成器实用程序(215kb)

    波形生成器实用程序 (APxWfmgenerator.exe) 允许您为各种测试信号生成 .wav 文件,具有可选的采样率、位深度和通道计数。您可以免费将本实用程序复制到其他计算机或媒体

  • AUX-0025 测试样品(283KB)

    AUX-0025 开关放大器测量滤波器的一组样品测试。这些测试对于辅助人员的正常使用来说没有必要。它们作为 AUX-0025 应用程序和性能的示例提供。

  • PESQ 语音波形(5MB)

    此压缩文件包含 APx500 音频测量软件安装的 PESQ 语音波形的副本。它为方便希望从 Web 下载这些文件的 APx500 用户提供。

实用程序、项目

  • APx Waterfall-CSD Plot Utility(200M)

    The APx500 CSD Utility is a Windows application for making a Cumulative Spectral Decay (CSD) plot, sometimes referred to as a waterfall plot, from the measured impulse response of a loudspeaker. The APx CSD utility also requires the SPK-RD software …

  • APx Polar Plot Utility(215M)

    The APx Polar Plot Utility is a Windows application for making polar measurements of loudspeakers or microphones with an APx500 audio analyzer and for creating 2-dimensional polar dispersion plots from the measured data. The APx Polar Plot utility also requires …

插件和驱动程序

  • APx ABC-MRT Plugin(676.8 MB)

  • APx STI Plugin(237 MB)

    对于公共广播、飞行记录仪和警察/消防/紧急通信系统的设计人员,APx 语音传输索引 (STI) 插件是 APx500 的软件附加组件,可提供符合 STIPA 测量和语音电平测量的 STIPA 测量国际标准 IEC 60268-16 (2011)。

  • APx500 USB 驱动程序更新(530KB)

    适用于在 Windows Vista、7 和 8 上运行的 APx500 v2.3 + 3.4 用户的 USB 驱动程序更新。如果您遇到以下症状,请应用此更新:1) 在安装 APx500 期间,您会收到以下一个或两个警告: [...]

  • APx Attack-and-Release 插件(1.7MB)

    自动增益控制 (AGC) 是一种信号处理技术,通常用于限制从助听器到广播等应用中的音频动态范围。AP 的最新插件支持对支持 AGC 的设备的攻击和释放(恢复)时间进行表征,并允许

  • APx 八度分析插件(150MB)

    对包含语音和噪声的宽带信号执行分频度分析是设计和验证各种音频和通信系统的重要因素。AP 的新插件将倍频度分析功能集成到 APx 测量中

  • APx Audio-Video Sync Plugin (2MB)

    A/V 同步插件将音频延迟测量集成到 APx 软件中,以支持设计人员在专业和消费系统中评估音频/视频计时(唇同步)。该插件还旨在支持作为两者一部分的 A/V 同步测试。

  • APx Hearing Aid Test Plugin (1.3MB)

  • APx Click & Pop Plugin (1.4MB)

    APx500 的咔嗒声和弹出测量提供四个结果 - RMS 电平 (DC AC)、指数时间加权电平、峰值电平和准峰值 (Q-峰值) 电平、采集波形 ,这些结果在分析电或声学信号的瞬态事件时非常有用。插件特别提供

  • APx LabVIEW .NET Driver (32MB)

    APx LabVIEW 驱动程序是虚拟仪器 (V) 的集合,它使用高级 LabVIEW 典型子视频为 LabVIEW 用户提供 APx500 应用程序编程接口 (API) 中提供的大部分功能。使用驱动程序,您可以快速

  • APx_APxHeadphoneTest_Utility_6-0-1(140MB)

应用文章

用户手册和规格

产品资料

  • AP 产品目录(6MB)

    2019 音频精密产品目录,包括 APx B 系列音频分析仪、APx500 音频测量软件、2700 系列音频分析仪和 AP 音频测试附件。

  • APx52x 系列数据表(1.5MB)

    APx52x 系列模块化、双声道和四声道性能音频分析仪。型号 APx525 和 APx526 的数据表。

  • APx 数字串行 I/O 数据表(900KB)

    音频精度为 APx 音频分析仪提供全新的数字串行 I/O,为 HDMI 接收器/发射器芯片、转换器和其他微元件的设计人员提供多通道芯片级连接。创新包括 8 个同时音频数据通道、独立时钟、缓冲示波器监视器和内置

  • APx 蓝牙旧式选项数据表(600kb)

    APx 的传统蓝牙模块具有内置的无线电和软件堆栈,允许工程师直接测量其蓝牙设备。所有蓝牙控件都集成到分析仪软件中,APx 支持 A2DP、HFP 1.6 和 AVRCP 配置文件。编解码器支持包括 SBC、aptX、CVSD 和宽带语音 (mSBC)

  • APx PDM 数据表(600kb)

    APx500 系列分析仪 PDM 模块的数据表。与 APx555、APx52x 系列和 APx58x 系列分析仪兼容。

  • APx PDM 选件技术详细信息(400KB)

    文档详细介绍了 APx PDM 模块的功能和操作。该模块是 APx555、APx52x 系列和 APx58x 系列音频分析仪的可用选项。

  • 感知音频测试数据表(500kb)

    APx PESQ 和 POLQA 软件选项的数据表

  • 电声选项数据表(400kb)

    APx 电声软件选项的单页说明,包括 Thiele-Small 特性、Rub Buzz 检测和扬声器生产测试。

  • APx500 系列音频分析仪和比较表(500KB)

    APx500 系列音频分析仪的两页概述,包括摘要规格比较表。

  • APx500 软件选项数据表(1.8MB)

    描述 APx500 软件的两页数据表,包括标准功能和测量以及其他软件选项。

  • AECM206 耳机测试夹具数据表(1.2MB)

    AECM206 耳机测试夹具是符合 IEC 60318-4 标准的附件,可在实验室和生产环境中简化耳塞和耳机测量。

  • APx 蓝牙双选选项数据表(1.6MB)

    音频精度的下一代蓝牙®模块 APx 蓝牙双™提供了更广泛的 A2DP 编解码器选择、更快的配对和连接时间、APx500 测量软件中增加的功能集,以及改进的 RF 屏蔽功能,可用于生产测试环境

  • ABC-MRT 软件选项数据表()

    两页数据表描述了 APx 软件选项,用于通过关节-带关联修改韵律测试 (ABC-MRT) 客观地测量语音清晰度。其他资源: 技术说明 134: ABC-MRT 在 APx 音频分析仪 APx ABC-MRT 插件

  • STI 软件选项数据表(900KB)

    两页数据表,描述了通过语音传输索引 (STI) 客观地测量语音清晰度的 APx 软件选项。其他资源: APx STI 插件下载 APx STI 数据表

  • APx52xB 系列音频分析仪 (800KB)

  • APx52x-585x B Series Installation and Specifications()

  • 最新消息: APx500 version 6.0.0 (400KB)

    最新消息: APx500 version 6.0.0

  • APx517B Data Sheet(English)(1MB)

    APx517B Data Sheet(English)

  • APx517B Data Sheet(500KB)

    APx517B Data Sheet